Eyeglasses Frame Spray Painting Machine
Eyeglasses frames are small, light and all curves — they need dedicated fixturing and gentle, even spraying. The Lynvex machine for this work is model QF-SEF2010.
Home › Eyeglasses Frame Spray Painting Machine
Eyeglasses frames are small, light and all curves — they need dedicated fixturing and gentle, even spraying. The Lynvex machine for this work is model QF-SEF2010.
Model QF-SEF2010 is the eyeglasses frame spray painting machine in this range. Its machine size is W2000 x D1000 x H1600 mm, or customised. Frames are held on rotating fixtures so the gun sees every face of the rim and temples in one cycle.
| Item | Value |
|---|---|
| Model | QF-SEF2010 |
| Machine size | W2000 x D1000 x H1600 mm, or customised |
| Workholding | Rotating frame fixtures |
Fixture contact points, gun distance and a dust-free booth decide whether frames come out clean. Send frame samples or drawings, including your largest frame, and state whether temples are coated assembled or separately.
This equipment is supplied with a 12-month warranty. Spare wear parts (guns, nozzles, filters, belts) are listed in the quotation so you can stock them at commissioning.
Axis spray machines serve production where the same part repeats thousands of times: consumer electronics housings, helmets and protective gear, sanitary ware, toys and moulded plastic or metal components. The economic logic is repeatability — once the gun path, distance and speed are set for a part, every cycle repeats them, so film thickness stays even and paint consumption per part can be measured and tuned.
Two operating habits decide results more than the machine class does. First, fixture design: a part that sits 2 mm differently each cycle sprays differently each cycle. Second, gun maintenance: a worn nozzle changes the fan pattern long before it fails outright, so nozzle checks belong in the weekly routine. Both points are covered when a configuration is commissioned.
An axis machine is one station in a process. Upstream, parts usually need cleaning or electrostatic dust removal, especially moulded plastics that carry static. Downstream, the coating decides the next step: air-dry paints need flash-off space, baked enamels need an oven, UV coatings need a curing section. When you request a quote, name the equipment you already own for these stages; the machine will be specified to feed it, including conveyor height and part hand-off.
Both run with suitable fixtures and settings. List your frame materials in the inquiry.
Send your part drawings, part size and output target. We will confirm the machine or line configuration and reply with a quotation.