Single-Axis Spray Painting Machine
A single-axis spray painting machine reciprocates one gun axis over flat parts: panels, glass, boards and sheet parts. It is the simplest automatic spraying machine in the range and the easiest to keep running.
Home › Single-Axis Spray Painting Machine
A single-axis spray painting machine reciprocates one gun axis over flat parts: panels, glass, boards and sheet parts. It is the simplest automatic spraying machine in the range and the easiest to keep running.
The single-axis reciprocating machine operates with a stroke of up to 1300 mm, return speed of 0 to 500 mm per second, reciprocating speed of 0 to 2000 mm per second and gun delay adjustable from 0 to 2500 seconds at stroke ends. These figures define the standard machine's working envelope.
| Parameter | Value |
|---|---|
| Maximum stroke | Up to 1300 mm |
| Return speed | 0–500 mm/s |
| Reciprocating speed | 0–2000 mm/s |
| End-of-stroke delay | 0–2500 s |
Flat and gently curved parts with one sprayed face are ideal. The machine also serves specialised single-face work such as anti-fingerprint coating lines, as in the photo on this page. Deep boxes, parts needing several faces coated in one pass and frequently changing shapes belong on axis machines or robots.
This equipment is supplied with a 12-month warranty. Spare wear parts (guns, nozzles, filters, belts) are listed in the quotation so you can stock them at commissioning.
Axis spray machines serve production where the same part repeats thousands of times: consumer electronics housings, helmets and protective gear, sanitary ware, toys and moulded plastic or metal components. The economic logic is repeatability — once the gun path, distance and speed are set for a part, every cycle repeats them, so film thickness stays even and paint consumption per part can be measured and tuned.
Two operating habits decide results more than the machine class does. First, fixture design: a part that sits 2 mm differently each cycle sprays differently each cycle. Second, gun maintenance: a worn nozzle changes the fan pattern long before it fails outright, so nozzle checks belong in the weekly routine. Both points are covered when a configuration is commissioned.
An axis machine is one station in a process. Upstream, parts usually need cleaning or electrostatic dust removal, especially moulded plastics that carry static. Downstream, the coating decides the next step: air-dry paints need flash-off space, baked enamels need an oven, UV coatings need a curing section. When you request a quote, name the equipment you already own for these stages; the machine will be specified to feed it, including conveyor height and part hand-off.
Yes — the end-of-stroke delay is adjustable, which is how edge build-up is controlled on panels.
Send your part drawings, part size and output target. We will confirm the machine or line configuration and reply with a quotation.