Glue Dispensing Machine QF-TF-550T
The glue dispensing machine in the Lynvex range is model QF-TF-550T: a computer-controlled X/Y/Z dispensing machine for adhesives and sealants in electronics assembly.
Home › Glue Dispensing Machine QF-TF-550T
The glue dispensing machine in the Lynvex range is model QF-TF-550T: a computer-controlled X/Y/Z dispensing machine for adhesives and sealants in electronics assembly.
The QF-TF-550T specification is a running accuracy of 0.2 mm with two glue valves, driven by a computer plus motion controller over X, Y and Z axes, with a stepper motor and metal synchronous belt drive and an SMEMA interface for line integration.
| Parameter | Value |
|---|---|
| Model | QF-TF-550T |
| Running accuracy | 0.2 mm |
| Glue valves | 2 |
| Motion | X / Y / Z, computer plus motion controller |
| Interface | SMEMA |
Component fixing, sealing beads, gasketing and potting preparation are the standard jobs. Valve choice follows your adhesive's viscosity and the dot or bead size you need; send the adhesive name and a board drawing showing the dispense paths.
This equipment is supplied with a 12-month warranty. Spare wear parts (guns, nozzles, filters, belts) are listed in the quotation so you can stock them at commissioning.
Dispensing work is defined by the material and the path: adhesive viscosity decides the valve and feed arrangement, dot or bead size decides the nozzle, and the path layout decides how much of the cycle is motion versus dispensing. Two valves let the machine lay two materials, or a material and its activator, in one program without a changeover stop.
Accuracy in dispensing is a system result: the motion platform's running accuracy, the valve's response and the material's consistency all contribute. When you request a quote, name the adhesive, the smallest dot or bead and the boards or parts per hour — those three inputs size the machine honestly.
Material handling decides uptime: adhesives have pot lives, so feed quantity and cleaning intervals follow the material, not the clock alone. Keep spare nozzles and seals at the machine, and freeze the dispense program under version control with a signed first-article part, the same discipline used for any frozen production program. Boards or parts that arrive with varying height need a consistent fixture datum, or dot placement drifts even on an accurate platform.
The QF-TF family covers both duties with different valve setups; see the coating and dispensing category page for the comparison.
Send your part drawings, part size and output target. We will confirm the machine or line configuration and reply with a quotation.